Filter
Anderson USA Whoops Ersatzteilkit für AR15
Anderson USA Whoops Ersatzteilkit für AR15 Bestehend aus:Bolt Catch Detent     Bolt Catch Pin 3/32" x 1/2"Coiled PinBolt Catch Spring,  Buffer Detent,    Buffer Detent Spring, Disconnect Spring,    Magazine Catch Spring for AR15,    Safety Selector Detent for AR15,    Safety Selector Spring,    Take Down Pivot Pin Detent (2 needed per rifle),  Detent Take Down Spring (2 needed per rifle),     Hammer Spring mil spec,  1/8 x 5/8 coiled Roll Pin for Trigger Guard,  Trigger and Hammer Pin for AR15 (2 needed per rifle)     and a Trigger Spring single stage mil-spec.
Produktnummer: SW10143
Hersteller: MAGPUL

14,95 €*
Geissele Airborne Charging (ACH) Ladehebel beidseitig für AR15
Geissele Airborne Charging (ACH) Ladehebel passend für AR15Nicht passend für HK MR223 & Haenel CR223 The Airborne Charging Handle is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the ACH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. The lower profile lever design of the ACH reduces chances of snagging on gear. All parts are then Type 3 Hardcoat anodized. 
Produktnummer: SW10095
Hersteller: GEISSELE

129,95 €*
Geissele Maritime Bolt Catch / Verschlusshebel für AR15
Geissele Maritime Bolt Catch / Verschlusshebel passend für AR15Passend an allen Mil-Spec Upper Receivern The Geissele Maritime Bolt Catch is designed with the warfighter in mind and will work with any lower receiver designed to accept a mil-spec M16/M4 Carbine bolt catch. The increased surface area promotes ease of function when locking back the bolt or releasing the bolt after a magazine change. In addition, the extended controls add an increased functionality for left handed shooters who no longer have to break their grip to manipulate the bolt catch. Left handed shooters can easily reach the controls using the index finger of their left hand making magazine changes and locking the bolt back much more fast and efficient. Aggressive checkering covers the surface of the levers giving the Geissele Maritime Bolt Catch a textured surface that enables positive feedback to the shooters hand when being used with gloves or at night. Manufactured from properly heat treated 8620 steel and manganese phosphate coated, the Geissele Maritime Bolt Catch is intended to serve as an enhanced mil-spec replacement and assist in giving our warfighters overmatch capability with the M16/M4 carbine platform.
Produktnummer: SW10087
Hersteller: GEISSELE

39,95 €*
Geissele Super 42 Buffer Spring Kit Carbine H1 für AR15
Geissele Super 42 Buffer Spring Kit H1 für AR15Bestehend aus gedrehter Super 42 Carbine Feder und H1 Buffer The Geissele Super 42 Spring was designed to improve the function and reliability of your AR-15 pattern rifle. Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun. This concept acts as a harmonic damper and energy absorber by allowing the springs to flex separately from each other. This flex helps displace excess energy which decreases the chance of spring failure and assists with making your AR-15 more reliable.Compared to the stock spring, The Geissele Super 42 Spring has a decreased tendency to lose length and force over a given round count. As an added bonus, it removes the annoying spring reverberations (twang) heard and felt by the shooter through the buttstock. The Super 42 Spring has a 15% stronger average return force than the standard buffer spring. This will assist in stripping rounds out of the magazine when operating with a dirty weapon or when using steel-case ammo.NOTE:  The Super 42 is for use with Carbine length buffer tubes and is not compatible with rifle length or A5 buffer tubes/receiver extensions, a special rifle length Super-42 is available on our website. We do not recommend the Super 42 with 300 Blackout subsonic ammunition. The Super 42 Spring may be too powerful and not allow the rifle to function properly.
Produktnummer: SW10100
Hersteller: GEISSELE

99,95 €*
Geissele Super Charging (SCH) Ladehebel beidseitig für AR10 DPMS
Geissele Super Charging (SCH) Ladehebel passend für AR10 / DPMS LR308 StandardNicht passend für HK MR308 & Haenel CR308 The Super Charging Handle (SCH®) is machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the firearm. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed systems. All parts are then Type 3 Hardcoat anodized. The 7.62 SCH® is not compatible with the HK 762, Colt 901, DPMS GII, Adams Arms .308 Patrol Rifle, Daniel Defense DD5, Sig 716, BPM (Barnes Precision Machine) Long Range Marksman .308, Smith & Wesson MP-10, Bushmaster BAR-10, & Rock River Arms LAR-8.
Produktnummer: SW10096
Hersteller: GEISSELE

179,95 €*
Geissele Super Charging (SCH) Ladehebel beidseitig für AR15
Geissele Super Charging (SCH) Ladehebel passend für AR15Nicht passend für HK MR223 & Haenel CR223 The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black and DDC (Desert Dirt Color).
Produktnummer: SW10086
Hersteller: GEISSELE

129,95 €*
Geissele Super Charging (SCH) Ladehebel beidseitig für HK MR308 / HK417
Geissele Super Charging (SCH) Ladehebel passend für Heckler & Koch MR308 / HK417Farben: schwarz & DDC (Desert Dirt) The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems.
Produktnummer: SW10088
Hersteller: GEISSELE

199,95 €*
Geissele Super Charging (SCH) Ladehebel beidseitig für SIG Sauer MCX
Geissele Super Charging (SCH) Ladehebel passend für SIG Sauer MCX The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black and DDC (Desert Dirt Color).
Produktnummer: SW10097
Hersteller: GEISSELE

149,95 €*
Geissele Super Duty Lower Parts Kit für AR15
Geissele Super Duty Lower Parts Kit für AR15 ! ! Inklusive Geissele Maritime Verschlußhebel, Super Duty Triggerguard & beidseitiger Sicherung ! ! The Geissele Enhanced Lower Parts Kit includes all the internal parts necessary to complete or rebuild your lower receiver. All key components on this kit are manufactured in-house at our facility in North Wales, PA. Made from proprietary Geissele designs out of Stainless Steel, the Geissele Enhanced LPK ensures a much longer life-span and a much lower chance of rusting or failing in extreme conditions and heavy use. The Geissele Enhanced Lower Parts Kit includes our Maritime Bolt Catch, famous for its aggressive texturing and extended paddles; and our Ambidextrous Posi-Lock safety, which features a satisfying and positive tactile feedback when engaging the safe or fire position. Rounding out the Geissele Enhanced LPK is our Geissele Trigger Guard, which features a wider opening to ease operation while wearing gloves. The Geissele Trigger Guard is machined out of 7075-T6 aluminum and Type 3 hardcoat anodized.
Produktnummer: SW10101
Hersteller: GEISSELE

139,95 €*
Magpul 1913 Weaver/Picatinny Bipod
Magpul 1913 Weaver / Picatinny BipodPassend an allen Weaverschienen Material: Stahl & PolymerFarbe: schwarz
Produktnummer: SW10147
Hersteller: MAGPUL

159,95 €*
Magpul Armorers Tool / Montagewerkzeug
Magpul Armorers Tool / Montagewerkzeug passend für AR15Ideal für alle Arbeiten an AR PlattformenMaterial: StahlFarbe: schwarz
Produktnummer: SW10057
Hersteller: MAGPUL

89,95 €*
Magpul ASAP Adapterplatte für AR15
Magpul ASAP Adapterplatte passend für AR15Passend an Mil-Spec Lower-Receivern (OA, Schmeisser, Windham, etc.)Material: StahlFarbe: schwarz
Produktnummer: SW10069
Hersteller: MAGPUL

33,95 €*
Magpul ASAP QD Adapterplatte für AR15
Magpul ASAP QD Adapterplatte passend für AR15Passend an Mil-Spec Lower-Receivern (OA, Schmeisser, Windham, etc.)Material: StahlFarbe: schwarz
Produktnummer: SW10068
Hersteller: MAGPUL

33,95 €*
Magpul BAD Lever
Magpul BAD Lever passend für AR15Passend an Mil-Spec Receivern (OA, Schmeisser, Windham, etc.)Material: StahlFarbe: schwarz
Produktnummer: SW10056
Hersteller: MAGPUL

34,95 €*
Magpul BEV Montageblock für AR15
Magpul BEV Montageblock passend für AR15Ideal für alle Arbeiten an AR PlattformenMaterial: Stahl & polymerFarbe: schwarz
Produktnummer: SW10109
Hersteller: MAGPUL

66,95 €*
Magpul Enhanced Magazine Release für AR15
Magpul Enhanced Magazine Release passend für AR15Passend an Mil-Spec Lower-Receivern (OA, Schmeisser, Windham, etc.)Material: polymerFarbe: schwarz
Produktnummer: SW10064
Hersteller: MAGPUL

23,95 €*
Magpul Ladder Rail Panel
Magpul Ladder Rail PanelPassend an allen Weaver- und PicatinnyrailsMaterial: gummiertFarbe: schwarz / FDE / OD Green
Produktnummer: SW10044
Hersteller: MAGPUL

12,95 €*
Magpul MLOK Bipod
Magpul MLOK BipodPassend an allen MLOK SchnittstellenMaterial: Stahl & PolymerFarbe: schwarz
Produktnummer: SW10146
Hersteller: MAGPUL

159,95 €*
Magpul MLOK Bipod / Zweibein Adapter
Magpul MLOK Bipod MontageadapterPassend an allen MLOK SchnittstellenMaterial: StahlFarbe: schwarz
Produktnummer: SW10110
Hersteller: MAGPUL

33,95 €*
Magpul MLOK Cover Type 1
Magpul MLOK Cover Type 1Passend für MLOK SchnittstellenMaterial: gummiertFarbe: schwarz / FDE / OD Green
Produktnummer: SW10045
Hersteller: MAGPUL

16,95 €*
Magpul QD Sling Swivel
Magpul QD Sling SwivelMaterial: StahlFarbe: schwarz
Produktnummer: SW10067
Hersteller: MAGPUL

17,95 €*
Magpul QD Sling Swivel Bipod
Magpul QD Sling Swivel BipodPassend an RiemenbügelösenMaterial: Stahl & PolymerFarbe: schwarz
Produktnummer: SW10148
Hersteller: MAGPUL

184,95 €*
Magpul QDM Sling Swivel
Magpul QDM Sling SwivelMaterial: StahlFarbe: schwarz
Produktnummer: SW10111
Hersteller: MAGPUL

29,95 €*
Magpul RSA QD Sling Adapter
Magpul RSA QD Sling AdapterPassend an allen Weaver- und PicatinnyrailsMaterial: StahlFarbe: schwarz
Produktnummer: SP100001
Hersteller: MAGPUL

32,95 €*